While washing the bike, you should take special care of some parts because if there is water in these parts then they can get spoiled and you may feel the loss of thousands. Today we are going to show the right way of bike washing.
Most people prefer to wash their bikes at home once a week. In fact, the use of less water helps in cleaning the bike and also saves the expenses at the service station. However, while washing the bike, you should take special care of some parts because if the water runs in these parts, they can get spoiled and you may feel the loss of thousands. Today in this news we are going to tell you about the same parts of the bike which should be saved from water.
Battery: Battery is very important for any motorcycle because with the help of this you start the bike and if there is any problem in it, then there is a problem in starting the bike as well as the horn does not ring. By the way, dry batteries are used in bikes but there are metal points on them. If water runs on them, they rust and cause battery problems.
Engine oil compartment: Some people forget to turn it off after checking the oil level in the engine oil compartment and the water goes off while washing the bike. If this happens, it becomes very difficult to start the bike or you have to remove the oil again and buy a new oil instead. If more water goes into this compartment, it can also damage the engine.
Console: If there is too much water in the place where the bike has control buttons, then the horn, headlight and many other buttons stop working. In this case, you should clean this part with a wet cloth. Switching on the water can cause the switches here to completely malfunction.
Air Filters: With the help of air filters, clean air reaches the engine. If it becomes too wet while washing with water, the bike may have problems starting. The air filter is the most important part of the engine and it continuously keeps the clean air delivered to the engine.